Ultra Scan Probe for Ferrous Substrates | Range: 0-60mils / 0-1500m | Elcometer 456

Ultra Scan Probe for Ferrous Substrates | Range: 0-60mils / 0-1500m | Elcometer 456

Manufacturer: Elcometer

Part #:T456CF1U

Description: Designed to work with any of our Top Ferrous or Top Dual FNF Elcometer 456 Separate Gauges.

Featuring a highly durable snap on replaceable probe cap, the Elcometer 456 Ultra/Scan Probe allows users to take individual readings or rapidly scan large surface areas without damaging the probe or the coating.

With a reading rate in excess of 140 readings per minute the Auto Repeat Mode can significantly speed up the inspection of large coated areas.

When the Ultra/Scan Probe is connected to the Elcometer 456 Model T with Auto Repeat Mode selected, SSPC PA2 (or similar test methods) can be completed more than 40% faster.

Specifications:

• Range: 0-60 mils (0-1500m)
• Accuracy: 1-3% or 0.1 mil (2.5m)
• Resolution: 0-60 mils (1m: 0-1500m
• Minimum headroom: 85mm (3.50)
• Minimum sample diameter: 5mm (0.59)

End Caps

Data Sheet